Get your stickers into shape with die-cut sticker printing! Stickers are excellent branding and promotional marketing tools, and die-cut stickers are even better because they easily command attention. Die-cut sticker printing is an incredibly economical way to enhance your branding efforts, promote a specific product or service or motivate a direct response. The quality of your die-cut sticker is important, not only for sticker longevity but also for projecting a professional image.

Our custom printed die-cut stickers are produced on state-of-the-art printing presses that undergo daily color calibration, ensuring you receive the best possible stickers at an unbelievable price. We use only the best paper stocks, with great adhesion on various surfaces, making our die-cut stickers versatile, durable and useful in any application.

What is a UV coating?

A UV coating is applied to a printed sheet, then bonded and cured with ultraviolet light. This coating yields a tough, almost unscratchable surface that is extremely durable.

In order to ensure the best quality for your die-cut project, please follow these guidelines:

• Make sure that your artwork fits the exact size and shape of the die you have selected.
• Be sure that the file includes a 1/8" bleed outside of the entire cut line.
• Include a 1/8" safety area within the cut line where there is no text or important images.
• If you have a border, it must be at least .25" on all sides.

*Custom dies require proper die line and FPO files.

Resolution

Resolution, also known as DPI (Dots Per Inch) or PPI (Pixels Per Inch), can be described as the number of dots that fit horizontally and vertically into a one-inch space. Generally, the more dots per inch, the more detail captured and the sharper the resulting image.

Photoshop
To see if your file has the proper resolution for printing in Photoshop, click on Image>Image Size. View the resolution section. The resolution should be set to 300 dpi.

Acrobat
To see if your file has the proper resolution in Acrobat, set your view to 300%. If your artwork appears pixelated beyond this point, then your artwork is low resolution.

How do I know if my resolution is good for print?
If your artwork appears pixelated beyond the 300% view in Acrobat, then this
is an indication that your file is low resolution. If your artwork appears crisp at 300%, then this is a good indication that your resolution is print ready.

DO NOT ENLARGE a 72 dpi file in your 300 dpi document.
A common misconception is that you can convert a file from 72 dpi to 300 dpi. This is both true and false. If your image is 4 by 6 inches at 72 dpi, the image will actually be smaller when importing it to a 300 dpi document. This is not the same for files that are large in size at 72 dpi. For example, if your file is 28 inches by 40 inches at 72 dpi, then the file is large enough to import into a 300 dpi document.

DO NOT RESAMPLE THE RESOLUTION in Photoshop.
Another misconception is that you can up the resolution from 72 dpi to 300 dpi in Photoshop simply by changing the current dpi to 300 dpi. This is incorrect. Doing so will make your file pixelated.

CMYK Color Mode
Color mode must be in CMYK to be a print ready file. If file(s) are submitted using any other color mode, such as RGB or Pantone, the file(s) will be converted to CMYK during preflighting. Conversion from one color standard to another may result in a colors shift or colors dropping out.

A hard copy proof is available in most of our products to view an accurate color representation of your artwork before going to press.

The following illustrates the visual difference between RGB (monitor) and CMYK (printed).

Bleeds

Bleeds are required in all artwork with an image extending to one of the borders. Add an eighth of an inch (0.125") to each side to allow for cutting. 

Borders

1/8" Added for Bleed
1/4" Minimum Border Size

Borders should be at least 1/4" thick PLUS 1/8" bleed for a total size of 3/8" thick.

The cutting process for printed materials has a mechanical tolerance of about 0.0625 or 1/16 of an inch. When using a border in your artwork, it is essential that your design use at least 0.25 or 1/4 of an inch of white space from your border to the cut line to maintain a symmetric appearance.

How Do I Get My Blues To Not Print Purple?

For more accurate color reproduction of your files, we recommend you follow the CMYK color values.

Printing tip: When trying to achieve reflex or navy blue values, it is important that the magenta value is not too high, as blue + red (cyan + magenta) = purple vs. blue.

Depending on the blue you desire the best practice is to ensure that the magenta values are no more than 60% for reflex blue and no more than 70-75% at the most for richer/darker blues.

Material: Clear Polyester (UV Coating)

Clear Polyester Sticker Paper

Indoor or outdoor use: Transparent polyester sticker paper with a high-gloss UV coating and zero split backing. Colors are not printed solid and have a translucent, stained glass look.

NOTE: White in your design will be completely transparent on this stock.

** Crack-and-peel backing that is easy to use.